#include <ESP8266WiFi.h>
#include <ESP8266WebServer.h>
IPAddress apIP(42, 42, 42, 42); // Defining a static IP address: local & gateway
// Default IP in AP mode is 192.168.4.1
/* This are the WiFi access point settings. Update them to your likin */
const char *ssid = "ESP8266";
const char *password = "ESP8266Test";
// Define a web server at port 80 for HTTP
ESP8266WebServer server(80);
const int ledPin = D4; // an LED is connected to NodeMCU pin D1 (ESP8266 GPIO5) via a 1K Ohm resistor
bool ledState = false;
void handleRoot() {
digitalWrite (LED_BUILTIN, 0); //turn the built in LED on pin DO of NodeMCU on
digitalWrite (ledPin, server.arg("led").toInt());
ledState = digitalRead(ledPin);
/* Dynamically generate the LED toggle link, based on its current state (on or off)*/
char ledText[80];
if (ledState) {
strcpy(ledText, "LED is on. <a href=\"/?led=0\">Turn it OFF!</a>");
}
else {
strcpy(ledText, "LED is OFF. <a href=\"/?led=1\">Turn it ON!</a>");
}
ledState = digitalRead(ledPin);
char html[1000];
int sec = millis() / 1000;
int min = sec / 60;
int hr = min / 60;
int brightness = analogRead(A0);
brightness = (int)(brightness + 5) / 10; //converting the 0-1024 value to a (approximately) percentage value
// Build an HTML page to display on the web-server root address
snprintf ( html, 1000,
"<html>\
<head>\
<meta http-equiv='refresh' content='10'/>\
<title>ESP8266 WiFi Network</title>\
<style>\
body { background-color: #cccccc; font-family: Arial, Helvetica, Sans-Serif; font-size: 1.5em; Color: #000000; }\
h1 { Color: #AA0000; }\
</style>\
</head>\
<body>\
<h1>ESP8266 Wi-Fi Access Point and Web Server Demo</h1>\
<p>Uptime: %02d:%02d:%02d</p>\
<p>Brightness: %d%</p>\
<p>%s<p>\
<p>This page refreshes every 10 seconds. Click <a href=\"javascript:window.location.reload();\">here</a> to refresh the page now.</p>\
</body>\
</html>",
hr, min % 60, sec % 60,
brightness,
ledText
);
server.send ( 200, "text/html", html );
digitalWrite ( LED_BUILTIN, 1 );
}
void handleNotFound() {
digitalWrite ( LED_BUILTIN, 0 );
String message = "File Not Found\n\n";
message += "URI: ";
message += server.uri();
message += "\nMethod: ";
message += ( server.method() == HTTP_GET ) ? "GET" : "POST";
message += "\nArguments: ";
message += server.args();
message += "\n";
for ( uint8_t i = 0; i < server.args(); i++ ) {
message += " " + server.argName ( i ) + ": " + server.arg ( i ) + "\n";
}
server.send ( 404, "text/plain", message );
digitalWrite ( LED_BUILTIN, 1 ); //turn the built in LED on pin DO of NodeMCU off
}
void setup() {
pinMode ( ledPin, OUTPUT );
digitalWrite ( ledPin, 0 );
delay(1000);
Serial.begin(115200);
Serial.println();
Serial.println("Configuring access point...");
//set-up the custom IP address
WiFi.mode(WIFI_AP_STA);
WiFi.softAPConfig(apIP, apIP, IPAddress(255, 255, 255, 0)); // subnet FF FF FF 00
/* You can remove the password parameter if you want the AP to be open. */
WiFi.softAP(ssid, password);
IPAddress myIP = WiFi.softAPIP();
Serial.print("AP IP address: ");
Serial.println(myIP);
server.on ( "/", handleRoot );
server.on ( "/led=1", handleRoot);
server.on ( "/led=0", handleRoot);
server.on ( "/inline", []() {
server.send ( 200, "text/plain", "this works as well" );
} );
server.onNotFound ( handleNotFound );
server.begin();
Serial.println("HTTP server started");
}
void loop() {
server.handleClient();
}
No comments:
Post a Comment